Setting Up Your Range
Cooktop Assembly
warning
•Assemble the burners and grates only when the cooktop is cool.•If you have the optional Dacor grill or griddle, installing the range knobs in the wrong position may result in damage to it.
Remove the burner rings, burner caps and grates from their shipping packages.SimmerSear Burner Assembly
1.Install the SimmerSear burner ring on top of the SimmerSear burner base. Line up the indentations on the bottom of the ring with the pins on the base.
2.Set the outer SimmerSear burner cap on top of the burner ring. Make sure it is centered on top.
3.Set the inner SimmerSear burner cap on the center of the burner base. Line up the ridge on the bottom of the cap with the pins on the center of the base.
Ridge on bottom of oninner burner capOuter burnercap
BurnerringStandard Burner Assembly
1.Install the standard burner rings on the standard burner bases. Match the different sizes. Put the hole on the edge of each ring over the igniter. Center the tabs on the bottom of each ring in the hole in the center of each base.
2.Install the standard burner caps. The ridge on the bottom of each cap must surround the top of each ring.
Ridge on bottomof burner capIgniterholeBurner
ring
Igniter onburner baseStandard BurnerAssemblyGrate Installation
Gently set the grates on top of the spill tray. Put the legs of each grate into the corresponding dimples.
Assembly
7