Operating the Oven

Installing the Oven Racks Warning

To reduce the chance of burns, position the oven racks when the oven is cool. If you must reposition a rack when the oven is hot, do not allow pot holders to contact the heating element inside the oven.

Your oven comes with Dacor’s deluxe GlideRack oven racks. You can pull them out further than other types of oven racks and still support heavy pots and pans full of food. They are great for heavier foods and the optional Dacor baking stone.

To install an oven rack:

2.Begin to slide the rack in, lifting the front safety clips over the front of the oven rack supports.

3.Push the rack all the way in.

4.Grasp the rack in the center of the front and pull. The rack should come forward while the guides remain in place.

To remove an oven rack:

•Grasp the rack with both hands and pull it gently straight out toward you until it stops.

•Lift up until the front safety clips just clear the front of the rack supports on the oven. Continue to pull out. Moving the end of the rack back and forth slightly, left to right, as you pull, will make it easier to remove.

1.Align both sets of safety clips (right and left) on the back of the rack guides with the oven rack supports as shown below. NOTE: The diagram below shows instal- lation with the rack guides extended but, the rack may be installed with or without the guides extended, whichever is easier.

Rack guides

Lift front safety clips over rack supports

Front of

 

Rack

rack

Slide oven rack

support

 

 

supports between

 

 

back safety clips

 

Back of guide

GlideRack Oven Rack Installation

10