Setting Up Your Range
WARNING
The oven racks become hot when the oven is in use.
Your oven comes with Dacor’s deluxe GlideRack oven racks. You can pull then out further than other types of oven racks and still support heavy pots and pans full of food. They are great for heavier foods and the optional Dacor baking stone.
To install an oven rack:
1.Align both sets of safety clips (right and left) on the back of the rack guides with the oven rack supports as shown below. NOTE: The diagram below shows installation with the rack guides extended but, the rack may be installed with or without the guides extended, whichever is easier.
2.Begin to slide the rack in, lifting the front safety clips over the front of the oven rack supports.
3.Push the rack all the way in.
4.Grasp the rack in the center of the front and pull. The rack should come forward while the guides remain in place.
To remove an oven rack:
•Grasp the rack with both hands and pull it gently straight out toward you until it stops.
•Lift up until the front safety clips just clear the front of the rack supports on the oven. Continue to pull out. Moving the end of the rack back and forth slightly, left to right, as you pull, will make it easier to remove.
Rack guides
Lift front safety clips over rack supports
Front of rack | Rack | |
Slide oven rack | ||
support | ||
supports between |
| |
back safety clips |
| |
| Back of | |
| guide |
GlideRack Oven Rack Installation
7