Dacor DR30GFS, DR30GIFS, DR30GIS (7.6 cm), (52.4 cm), cabinets Countertop overhang 1 5/8” (4.1 cm) max, 3” (7.6 cm), 3/8” (9.5 mm) min, (53.0 cm), overhang to width of, front

DR30GS, DR30GFS, DR30GIS, DR30GIFS

Document # PG05-007		Revised 04/04/13 Page 4/5
	Distinctive 30” Wide	PLANNING
	All Gas Ranges	GUIDE

Raised Vent (Self-Rimming) Installation Cutout Options (Models DR30GIS and DR30GIFS Only)

All tolerances +1/16” (+1.6 mm), -0 unless otherwise noted.

For all installations with a raised vent:

Countertop height: 34 3/4” (88.3 cm) min. 36 7/8” (93.7 cm) max.

Countertop thickness: 1 5/8” (4.1 cm) max.

NOTE: For all raised vent installations, use only Dacor raised vent model ERV3015.

10” min. (25.4 cm)				Rear wall or		3/8” (9.5 mm) min.
to any combustibles
				countertop edge		countertop overhang
above counter both sides
		27 1/2” (69.9 cm)
	r	aised vent openin			g
					1			3”
		29 1/4” (74.3 cm)
								(7.6 cm)
		countertop opening
						20	5/8”
			30” (76.2 cm)
						(52.4 cm)
			cabinet opening
			below countertop

Cabinet face

below countertop

Notch countertop overhang to width of

cabinets Countertop overhang 1 5/8” (4.1 cm) max.

24” - 24 1/4” Cabinet Depth

Partial Side Panels Installed (Top View)2

10” min. (25.4 cm)		Rear wall or
to any combustibles
above counter both sides		countertop edge
	3/8” (9.5 mm) min.		3” (7.6 cm)
	countertop overhang

			3/8” min. (1.0 cm) flat countertop
			overhang required behind cutout
		Wall					29 1/2” (74.9 cm)
Stiffener								Countertop
	ERV3015
								Back of
	raised vent			DR30GI[F]S				control panel
						range		Cabinet face
							Shown with partial
							side panel installed
					3/8” min. (1.0 cm)
					space behind raised vent
					chassis to clear stiffener

IMPORTANT: If optional side panels are not installed cabinet face must be flush with back of control panel.

Side View - DR30GI[F]S Range and

ERV3015 Raised Vent

10” min. (25.4 cm)	Rear wall or	3/8” (9.5 mm) min.
to any combustibles
	countertop edge	countertop overhang
above counter both sides

			27 1/2” (69.9 cm)
		r	aised vent openin			g
						1
			29 1/4” (74.3 cm)							20	7/8”
			countertop opening				20	5/8”	(53.0 cm)
	25 3/4”
					30” (76.2 cm)		(52.4	cm)			to
	(65.4 cm)
	max.			cabinet opening						24 1/8”
			below countertop						(61.3 cm)
			Notch countertop
		overhang to width of
					cabinets
					Cabinet face
Countertop
			below countertop
	front

24 1/4” - 27 1/2” Cabinet Depth

Partial Side Panels Installed (Top View)

	27 1/2” (69.9 cm)
r	aised vent openin		g
			1				3”
	29 1/4” (74.3 cm)
							(7.6 cm)
	countertop opening
				24		1/8”
		30” (76.2 cm)
					(61.3 cm)
		cabinet opening
		below countertop

Cabinet face

below countertop

Notch countertop overhang to width of

cabinets Countertop overhang 1 5/8” (4.1 cm) max.

Custom Cabinet 27 1/2” or Deeper,

Partial Side Panels Removed (Top View)

1To create a “built-in look” on the front of the cabinet, this dimension may be changed to 29 1/4” (74.3 cm). Width notches remains 30”.

2For 24 to 24 1/4 inch deep cabinets, the side panels and control panel will protrude from the cabinet face a total of 5 5/8 inches.

All specifications subject to change without notice. www.dacor.com Phone: (800) 793-0093