Installation Instructions
Final Installation
1.Peel the protective plastic coating off of the range, including the range door.
2.Adjust the range legs to the desired height.
3.Carefully slide the range into position in the cutout. The rear
WARNING
To avoid personal injury or damage to the door from it falling off its hinges:
•Make sure that the notch on the bottom of each hinge rests on top of the lower lip of each hinge receptacle before attempting to open the oven door.
•Rotate the hinge locks toward the front of the range immediately after installation of the door.
1.Grasp the oven door on opposite sides and hold it at a 15° angle from the front of the oven. Slide the hinges into the hinge openings, resting the bottom of the hinge arms on the hinge receptacles. Continue to hold the door at a 15° angle with one hand while pushing in on each of the bottom corners of the door. Push until the notch on the bottom of each hinge slips over the lower lip of each hinge receptacle.
2.Lower the door to the fully opened position.
3.Rotate the two hinge locks toward the oven.
4.Slowly and carefully open and close the door completely to ensure that it is properly installed.
5.Remove any packaging from inside the oven(s).
Installing the Burner Knobs
CAUTION
Installing the range knobs in the wrong position may result in damage to the griddle included with the range. The knobs for the right burners are marked with the maximum griddle settings.
There are two (2) different types of knobs supplied with the range. The knobs for the right burners have the words “MAX GRIDDLE” on them.
NOTE: When installing the knobs, align the
•Put the knobs with the words “MAX GRIDDLE” on them onto the right valve shafts.
•Put the remaining knobs on the left valve shafts
Notch on bottom | Lower lip |
of hinge | of hinge |
| receptacle |
Door Installation
Icons on Left Burner Knobs
Icons on Right Burner Knobs
18