Installation Instructions
Installing the Burner Components
WARNING
Never attempt to operate the cooktop section of the range with any of the burner rings, burner caps or grates removed.
•Remove the burner rings, burner caps and grates from their shipping packages.
•Install the burners as shown.
•Gently set the grates on top of the spill tray. Put the legs of each grate inside the corresponding dimples.
Crown Burner
Spill Tray
Stack Burner
STEP 3: Install burner cap. Ridge on cap must surround top of ring.
STEP 2: Install burner ring. Line up ring tabs with head slots. Twist back and forth to assure proper seating.
STEP 1: Install burner head. Put locating tab in keyed hole.
Keyed
Hole
Ridge on bottom of burner cap
Burner Ring
Burner Head
Burner Base
STEP 3: Install burner caps. Ridge on cap must surround top of ring.
STEP 2: Turn ring until it drops into place. Twist back and forth to assure proper seating.
STEP 1: Put burner ring on top of head.
Ridge on bottom of burner cap
Burner
Ring
Crown Burner Installation
Burner
Head
Stack Burner Installation
19