Installation Instructions

2.Locate the anti-tip bracket included in the parts box.

3.Install the anti-tip bracket on the floor using the four (4) included screws. See the diagram at the right.

Anti-Tip Bracket Placement

A4 1/4” (10.8 cm)

B2 1/2” (6.4 cm)

A

B

Back of range

Side of range

Door Removal

Remove the door to make the range easier to move during the installation process.

WARNING

•Do not attempt to disengage the hinge catches with the door removed from the oven. The hinge springs could release causing personal injury.

•Do not lift or carry the oven door by the door handle. 1. Open the door to its fully opened position.

2. Rotate the catch over the retaining arm on both hinges.

Catch

3.Lift the oven door to about a 15° angle from the vertical position.

4.Hold the door with both hands just below the handle. Pull the door up and away from the oven.

Retaining arm

Door Gripping Points

7