Installation Instructions
Final Installation
1.Peel the protective coating off of the range, including the door.
2.Adjust the legs to the desired height.
3.Carefully slide the range into position in the
Re-installing the Oven Door(s)
WARNING
To avoid personal injury or damage to the door from to it falling off its hinges:
•Make sure that the notch on the bottom of each hinge rests on top of the lower lip of each hinge receptacle before attempting to open the oven door.
•Rotate the hinge locks toward the front of the range immediately after installation of the door.
1.Grasp the oven door on opposite sides and hold it at a 15° angle from the front of the oven. Slide the hinges into the hinge openings, resting the bottom of the hinge arms on the hinge receptacles. Continue to hold the door at a 15° angle with one hand while pushing in on each of the bottom corners of the door. Push until the notch on the bottom of each hinge slips over the lower lip of each hinge receptacle.
2.Lower the door to the fully opened position.
3.Rotate the two hinge locks toward the oven.
4.Slowly and carefully open and close the door completely to ensure that it is properly installed.
5.Remove any packaging from inside the oven(s).
Installing the Burner Knobs
CAUTION
Installing the range knobs in the wrong position may result in damage to the griddle included with the range. The knobs for the center burners are marked with the maximum griddle settings.
NOTE: When installing the knobs, align the
There are two (2) different types of knobs supplied with the range. The knobs for the center burners have the words “MAX GRIDDLE” on them.
•Put the knobs with the words “MAX GRIDDLE” on them
onto the inner (center burner) valve shafts.
Icons on Center Burner Knobs
• Put the remaining knobs on the outer valve shafts.
Notch on bottom | Lower lip of |
of hinge | hinge receptacle |
Door Installation
Icons on Outer Burner Knobs
16