Care and Cleaning
Slide mounting bracket under clip on slide.
Push in on tab.
Pull up on drawer front.
Clip on slide
Slide
| Push drawer front |
| down until tab locks |
| in place. |
Drawer Removal | Drawer Installation |
Before You Call for Service
Problem Solution Guide
problem
may be caused by
what to DO
Nothing works. | Power plug disconnected. | Connect plug to a dedicated, grounded, three- | |
|
| prong electrical outlet. | |
| Timer is not set. | Select time duration according to the | |
|
| Operating Instructions section. | |
|
|
|
|
| Warming drawer is not connected | Plug the warming drawer into a 120 Vac, | |
| to power. | 15 amp, dedicated electrical outlet. | |
|
|
|
|
| Tripped circuit breaker or blown | Check the house circuit breaker or fuse for | |
| fuse. | the circuit that supplies power to the warming | |
|
| drawer. | |
|
|
|
|
Drawer does not slide smoothly | Drawer is incorrectly mounted into | Remount drawer into slide, per instructions | |
or drags. | slide mechanism. | above. | |
|
|
|
|
| Drawer is | Reduce the weight to less than 50 pounds. | |
| is unbalanced. | Redistribute drawer contents. | |
|
|
|
|
Excessive condensation. | Warming drawer not preheated. | Preheat the warming drawer before each use. | |
|
|
|
|
| Incorrect humidity control setting. | Set humidity control to CRISP to allow mois- | |
|
| ture to vent. | |
|
|
|
|
One or more of the indicator | The control panel computer has | Try resetting the computer. Disconnect the | |
lights on the control panel blink | detected an error: | power cord, wait 20 seconds, then reconnect | |
on and off (one second on, one | #1 - Temperature error | it. Check the control panel. If the indicator | |
second off). | #2 - Sensor error | light still flashes, call the Dacor Customer | |
| #3 - Key pad error | Service Team at (800) | |
| #4 - Control error |
|
|
|
|
|
|
7