Preparing for Installation
Verify the Package Contents
Unpack the parts box and verify that all required components have been provided. If any item is missing or damaged, please contact the dealer immediately. Do not install a damaged or incomplete appliance.
ABlower assembly with filters
BChimney assembly (2 piece)
CChimney mounting bracket
DBlower assembly mounting bracket
ETempered glass hood*
FMounting and assembly hardware
GMounting hardware template
HUse and care manual
G
A D
H
F
B
C
E
*The glass hood comes in different colors and sizes. See the use and care manual maintenance section for part numbers.
Location Planning
Carefully check the location where the hood is to be installed. The hood should be placed for convenient access. Make certain that electrical power can be provided in the selected location.
Plan the installation so that all minimum dimensions are met or exceeded (see page 3). Dimensions shown provide minimum clearances, unless otherwise noted.
All contact surfaces between the hood and any cabinets or walls must be solid and at right angles.
Install the range hood and cooking appliance(s) so that they can be removed if service is required.
Make sure you have everything necessary for proper installation before proceeding with the installation.
NOTE: The mounting hardware included with the hardware packet is suitable for mounting to brick and masonry only. If mounting the range hood to drywall,
Dacor strongly recommends the using an anchoring system designed for use with drywall. In addition, Dacor strongly recommends that you install a reinforced mounting block between the studs behind all hood mounting locations.