Setting Up Your Cooktop
Burner and Grate Assembly
WARNING
Assemble the burners and grates only when the cooktop is cool.
SimmerSear Burner
1.Place the burner skirt over each SimmerSear burner head and base as shown. On model RGC365 be sure to match the correct size.
2.Put the burner cap on the burner head of each SimmerSear burner as shown below. Center the bottom of the cap inside the base. On model RGC365 be sure to match the correct size.
3.Put the cap cover on top of each SimmerSear™ burner cap. The ridge around the bottom edge of the cap cover goes around the top of the burner cap. On model RGC365 be sure to match the correct size.
Cap Cover
Burner Cap
Wide SideDown!
Skirt
Burner Head*
Base
SimmerSear Burner Assembly
*The burner head on the SimmerSear burner assembly is permanently attached to the burner base. It cannot be removed by the customer.
Standard Burners
1.Put the burner heads on the burner bases as shown below. Match the correct sizes. The bottom of the correct size burner head fits on top of the matching burner base. Line up the notch on the bottom of each head with the ignitor on the matching base.
2.Twist each head back and forth slightly to make sure it is properly seated.
3.Put the cap covers on top of the burner heads. The ridge around the bottom edge of the cap cover goes around the top of the burner head.
Line up notch | Cap Cover | |
with igniter |
| |
|
| Burner Head |
|
| Burner Base |
Notch | Igniter |
|
Standard Burner Assembly
Grates
Gently set the grates on top of the spill tray. Put the legs of each grate into the corresponding dimples.
5