Dacor RGC365 Cleaning the Optional Griddle, Replacing the Grate Feet, Dacor Part, Description

Care and Cleaning

Cleaning the Knobs and Trim Rings (Cont.)

6.Insert the trim rings into the holes in the posi- tions noted in step 4. Turn the ring until the flame icon is in the 9 o’clock position for each trim ring.

Flame icon in 9 o’clock position

7.To replace the knobs, align the “D-shaped” opening on the bottom of the knob with the end of the valve shaft. Carefully push the knob on until it stops.

8.Connect the cooktop power plug to the electrical outlet.

Cleaning the Optional Griddle

Clean the griddle after each use. Wash it thoroughly in hot soapy water to avoid stains from grease build-up. The griddle is coated with a non-stick coat- ing for easy cleaning. Warm water and liquid deter- gent are all that are needed for cleaning. Remove stubborn spots with a non-abrasive plastic mesh pad. To prevent scratching, do not use abrasives or abrasive cleaners. Use the soft side of a sponge to scrub it. Dry it with a lint-free cloth.

Replacing the Grate Feet

The rubber feet on the bottom of the grate supports can be replaced if they are lost or damaged to pre- vent damage to the spill tray. If necessary, you may use a pair of needle nose pliers to pull the feet free from the grate.

Dacor Part	Description
Number

103712	Grate Support Foot (4 used per grate)
103475	12” Grate (2 used per cooktop)
103476	10” Grate (Model RGC365 Only, 1
	Used per cooktop)

10