Specifications
Power | |
Consumed electricity | 75W |
Weight | 7.15kg |
Dimension (WxHxD) | 430mm x 91mm x 370mm |
Quick-start guide
■Please follow this guide from the beginning to the end. Before you start, unplug all the equipment from the mains supply.
Stage 1. Connecting the Player to your TV
Operative temperature | +5°C~40°C |
Installation condition | Horizontal / Relative humidity under 80% |
Signal type | PAL COLOR |
Antenna Input/output | |
VIDEO input | 1.0 |
AUDIO input | |
VIDEO output | VIDEO output terminal, 1.0 |
| RGB output (75Ω In load R: |
AUDIO output | Audio output terminal : |
200-240V~ AC 50/60 Hz
Television |
Aerial
Scart lead (not supplied)
A Fit the batteries into the remote control. Make sure that the (+) and
B Plug your aerial into the ANT IN socket of the player.
C Connect the black aerial lead provided from the ANT OUT socket of the player to your TV aerial socket.
Playable tape | Very high dense tapes with VHS marks |
Playable disc | DVD, |
Tape speed | SP:23.39 mm/s, LP: 11.70 mm/s |
Playtime | SP: 3hrs, LP: 6hrs (use of |
Back view of your player
D If you get the scart lead, connect your player to the TV as above. (You will get better pictures and sound quality if you connect your player with a scart lead.)
Clock display | 24hrs |
Time Recording | 8 programs a month |
Persistence in power failure | 1 min |
Stage 2. Connecting the Player to 5.1 CH Speaker system
VIDEO S/N (VCR) |
| Over 43dB(Standard recording) | |
Resolution | VCR | Over 240 lines (Standard recording) | |
|
|
| |
| DVD | Over 400 lines (DVD Disc PLAY) | |
|
|
| |
AUDIO (VCR) |
| Over 65dB | |
|
|
|
|
AUDIO (DVD) |
| 90dB |
|
|
|
|
|
AUDIO dynamic range |
| 90dB |
|
|
|
| |
Speaker Output | Center | 30W (6Ω ) (240 x 115 x 115) | |
|
|
|
|
(Impedance) & (Size) | Front L/R | 30W x 2 (6Ω | ) (140 x 115 x 200) |
| Rear L/R | 30W x 2 (6Ω | ) (108 x 88 x 164) |
| Subwoofer | 50W (6Ω ) (198 x 350 x 355) | |
Amp Frequency Response |
| 20Hz ~ 20KHz | |
Radio Tuning Range |
| FM : 87.5 ~ 108.0 MHz, AM : 522 ~ 1611KHz |
Front speaker | Front speaker | Rear speaker |
(right) | (left) | (left surround) |
|
| AM loop antenna |
|
| (supplied) |
A Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to
B If you get an active power subwoofer that has a power amplifier
C Plug AM loop antenna and FM antenna into the specified terminal on the back of player. Adjust the direction of the antenna in order to get the good condition of receiving.
Radio Intermediate Freq. | FM : 10.7 MHz, AM : 450 KHz |
FM Antenna Impedance | 75 Ω (unbalance) |
AM Loop Antenna Inductance | 12.5 uH (1KHz) |
Rear speaker (right surround)
FM wire antenna (supplied)
Center speaker
Subwoofer
•To obtain the best possible surround sound, adjust the speaker parameters (distance, level, delay time etc.) (See page
68 | 69 |