Daewoo DCR-9120 Setting up your player, Option 1 - Connecting your player through RF lead, Aerial

Setting up your player

■Before you start, unplug all the equipment from the mains supply.

(Option 1) - Connecting your player through RF lead

Connecting your player through

extra equipment (satellite system)

■ Before you start, unplug all the equipment from the mains supply. Installation

(Option 1) - Connecting your player through RF lead

200-240V~ AC 50/60Hz

Aerial

The type of aerial you should use, depends on local interference and how far you are from the transmitter. You should contact a local retailer if you have any

200-240V~ AC 50/60Hz

Television

Aerial

Back view of your player

questions about your aerial.

Back view of your player

(Option 2) - Connecting your player through SCART lead

200-240V~ AC 50/60Hz

Television

Aerial

Scart lead (not supplied)

Satellite

You can use this connection if your player has two scart sockets. This will improve sound and picture quality when you are recording from satellite.

Back view of your player

With this connection, if your player is receiving CH ARD and your TV is displaying CH3, when you press the [TV/VCR] button on the remote control, your TV will automatically display the CH ARD. “VCR” will be displayed.

In this mode, to change the viewing channels the [PR/PRESET] buttons on the player remote need to be used. To switch off this mode press [TV/VCR] on the remote control, TV remote can now be used as normal. You will get better pictures and sound quality if you connect your player with a scart lead.

12 13