OPERATING INSTRUCTING FOR THE AIR CONDITIONER
Before Starting This Unit
1)Select a suitable location, make sure you have easy access to an electrical outlet.
2)Install the Flexible Exhaust Hose and the Adjustable Window Slider Kit as depicted in Fig.5 &
Fig.5a
Fig.5
Fig.5a
NOTE: Step 2 is required only while using the cooling mode
3)Plug the unit into a 115V~60Hz grounded electrical outlet.
4)Make sure the water pump drain hose is correctly installed.
¡¡ 5) Press the on / off button to turn on the unit.
Water pump drain hose |
Fig.6 |
1BEFORE USE
Dehumidifying and Cooling Operations
-The operating range for cooling operating is
-If the cooling or dehumidifying operations have been switched off and need switching on again in a short time, allow approximately three minutes for the cooling or dehumidifying operations to resume.
-Make sure the water pump drain hose is correctly connected to the unit.
Power supply:
-Insert the AC Power Plug to a AC socket.
-Do not connect the air conditioner to a multiple socket outlet which is also being used for other electrical appliance.
-Be sure the power supply is AC 115V~ 60Hz.
4