TO SET AUTO MODE
This unit will automatically operate the unit according to its surroundings while in the Auto mode. All you have to set is the desired temperature and it will control the fan, coolness and dehumidifier. Follow procedures below:
1.Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the
remote display.
2.Make sure the AUTO indicator AUTO appears in the remote display. Using the TEMP. ▼ or ▲ buttons, set the desired temperature. The desired temperature can be changed up
or down 1 degree from the actual room temperature. For tempera- ture setting: 24~28°C
3. Then the unit will automatically operate.
AUTO
TO SET QUICK MODE
To set this unit to cool at the highest power, follow the procedures below:
1.Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the re-
mote display.
2.Press the MODE button until the Quick indicator appears in the display.
3.The unit will then start cooling the room at the highest power.
TO SET COOL MODE
To set the unit to cool the room to a desired temperature, follow the procedures below:
1.Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the remote display.
2.Press the MODE button until the Cool
indicator 
appears in the display.
3.Using the TEMP. ▼ or ▲ buttons, set the desired temperature. The desired tem-
perature can be changed up to 32°C and down to 18°C.
AUTO
4.To select the fan speed, press the FAN SPEED button until the desired speed appears in the display (see below).
FAN SPEEDS
“AUTO” The fan will automatically select the fan speed.
“” The fan will operate on low speed.
“” The fan will operate on medium speed.
“” The fan will operate on high speed. “NATURAL” The fan will randomly cycle through the speeds
simulating a cool breeze.
11
