TO SET UNIT TO SLEEP MODE
When you are going to sleep, select this feature and the unit will cool off the room to the desired temperature and then increase that temperature throughout the night.
1.Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the remote display.
3.Press the SLEEP button on the re- mote controller. The unit will then be in the sleep mode and will cool the room to the desired temperature. After a while the unit will increase the tem- perature again. This process will then repeat.
2.Press the MODE button to select the desired mode. Then, set the desired temperature using the TEMP. ▲ or ▼ buttons.
TO CANCEL SLEEP MODE:
To cancel sleep mode,
press the SLEEP button | AUTO | ||
|
|
| |
again; the SLEEP indicator |
|
|
|
will disappear in the dis- |
|
|
|
play. |
|
|
|
|
|
| |
TO SET TURBO/MILD MODE
1.The unit is fixed “MILD” mode on production.
2.Press the “TURBO/MILD” button for powerful cooling.
3.When press the “TURBO/MILD” button one more time, it will be back to “MILD” mode.
EMERGENCY OPERATION
If the remote control is lost, broken or has no batteries, follow the procedures below:
1.Open the indoor unit’s cover and make sure the EMERGENCY/REMOTE switch is set to the EMER- GENCY position.
EMERGENCY/REMOTE Switch
3.To turn the unit off, slide the EMERGENCY/ REMOTE switch to the REMOTE position.
2.The unit will then turn on and depending on the room temperature, it will select the cool or dehumidifier, fan speed and fan direction automatically.
EMERGENCY/REMOTE Switch
15
