Daewoo DT-42A1 user manual Engaging PIP mode, Mode is exited.Swap the pictures

Watching Two Pictures Simultaneously

•PIP (Picture-in-Picture) and P-by-P(Picture-by-Picture) modes allow users to watch two pictures simultaneously. POP mode is used in searching memorized 5 or 12 channels.

Engaging PIP mode

1

• Press the ‘PIP’ button once on the remote control to

engage the Picture-in-Picture mode.

• By pressing the button repeatedly, it will show the

following cycle.

If switched to P-by-P (Picture-by-Picture) mode, the

• screen will be split in half. The screen on the left side

is the main picture, and the sub-picture will be on the

PIP

right of the screen.

POP5

POP12

P-by-P

Main

Main

Main

Sub

Sub1

Sub2

Sub3

Sub1

Sub2

Sub3

Sub4

Sub12

Main

Sub5

Sub4

Main

Sub11

Sub6

Sub

Sub5

Sub10

Sub9

Sub8

Sub7

2• When PIP mode is engaged, the sub-picture can be displayed in one of the four corners by using ‚POSITION’ button.

•Whenever pressing the button, the sub-picture will be cycling in the following order.

Also, using “ PR ” and “ VOL ” button, the sub-picture can be moved to any position you want.Position of the Sub-picture

<Using ‘Position’ button>
			< Using „	PR	” and „	VOL	”
Main		Main	buttons>
	Sub	Sub		Sub
Main	Sub	Sub

Main

3• In order to swap between the main picture and sub- picture, press the ‘SWAP’ button.

•However, at POP5 and POP12, the pictures are not swapped. Main picture will change to the active sub- picture.

•Also, only TV channels are available for the sub-pictures of POP5 and POP12.

The sub-pictures search channels continuously until POP

mode is exited.Swap the pictures

Screen Adjustment of the Sub-picture

•Size and Alpha Blend of the subpicture can be adjusted on Screen Menu of OSD.

•These fuctions are availible only in PIP Mode.

Pip Size

Adjusting the size of the sub-picture with “ VOL ” buttons.

Alpha Blend

The adjustment of alpha blend allows the sub-picture to be translucent.

The translucent rate is controlled with “ VOL ” buttons.

51