Daewoo DT-42A1 user manual Input Select, Select the Desired Channel and Function

3

Input Select

			E	• Select [Component 1 or Component 2] by
			T
			N
			N	pressing the “COMPONENT” button of the
			O
	O	M	P
C				remote control or using the “INPUT SELECT”
				button of the PDP unit.
				• Each time you press the “COMPONENT”
				button, different input modes appear.
				The sequence is as follows:

Component 1

Component 2

	• N.B.: You cannot select component inputs if the picture in
	picture mode is on.
4	Select the Desired Channel and Function
	• Select the desired channel and function
	by using the remote control of the Digital
	Broadcasting Receiver.

NOTES:

1)Possible digital broadcasting signals: 1080i, 720p, 576p, 480p.

2)Antenna connection:

Apartment : Check if communal aerial receives digital broadcasts.

Private Houses: Set the indoor/outdoor UHF antenna to the direction of the digital broadcasting transmitting company.

3)For detailed connection method, refer to the owner’s manual of Digital Broadcasting Receiver.

4)What is a component? : Signals with which luminance and chrominance are separated, producing a sharp picture.

5)If the Digital Broadcasting Receiver has PC output terminal or DVI output terminal, connect to ‘PC INPUT’ or ‘DVI INPUT’ at the rear of the panel of the PDP.

27