C H A P T E R 6

Adjusting the Sound

Selecting stereo/SAP

The MTS(Multi-channel TV Sound) provides for an extra sound channel. So MTS feature allows you to improve your TV viewing with high fidelity stereo sound. SAP(Second Audio Program) used to transmit a second language of other audio information. If your TV receives a stereo sound(or SAP) broadcast, when the TV is turned on, select other channel or press the RECALL button on the remote control the word “Stereo”(or “SAP”) is displayed on the screen.

Listening to stereo sound

1With the TV turned on, press the MENU button until “Sound” menu will be displayed.

2Use the VCHW buttons select “Audio Mode” item.

3Press the CVOLB buttons repeatedly until: “Stereo” is displayed.

4Press the button twice or wait few seconds to return to normal TV viewing.

5Your setting will remain intact until you change it. Your TV will then automatically reproduce either stereo or monaural sound, whichever is broadcast.

Listening to second Language

1Follow steps 1~2 in “Listening to stereo sound” above.

2Press the CVOLB buttons repeatedly until: “SAP” is displayed.

3Press the MENU button twice or wait few seconds to return to normal TV viewing.

4If a SAP broadcast is received, you will hear only the second language from the speaker.

Note

If a broadcast signal is weak, it may cause noise and hum in stereo sound. Please select the Mono mode, the noise and hum should be reduced.

Chapter 6 : Adjusting the Sound 25

Page 30
Image 30
Daewoo DTQ 27U8SC Adjusting the Sound, Selecting stereo/SAP, Listening to stereo sound, Listening to second Language