36
OTHERS

TROUBLE SHOOTING

If you experience the following problems while using the unit, this troubleshooting
guide can help you.
•NO SOUND
- Check if the unit is connected securely.
- Make sure you operate the TV or amplifier correctly.
•NO IMAGE , IMAGE ROLLS AND NO COLOR
- Check if the unit is connected securely.
- Make sure you operate the TV correctly.
- Make sure you set the color system correctly.
•BAD SOUND QUALITY
- Make sure the audio output mode is set correctly.
- Make sure the audio connection between the unit and amplifier is right.
•DISC CAN NOT BE PLAYED
- There is no disc in the unit.
- Insert the disc on the disc tray properly with the label side up.
- Clean the disc.
- Moisture has condensed in the unit.
Remove the disc and leave the unit on for about one hour.
•REMOTE CONTROL DOES NOT WORK
- Remove barriers between the remote control and the unit.
- Replace the batteries with new ones.
- Point the remote control at the remote control sensor of the unit.
•ATTENTION: KEEPING THE STATUS OF STOP MORE THAN 5 MINUTES ENTERS
SCREEN SAVE MODE. WHEN THE SCREEN SAVE MODE IS KEPT
MORE THAN AN HOUR, THE SET ENTERS STAND-BY MODE.