Daewoo DV-T27N, DV-T47N manual Using advanced features

Using advanced features, continued

-Select OFF if you want the VCR to remain in the TV mode. This is useful if you watch your VCR on the TV’s video input and you don’t want your antenna/cable signal interrupted by the VCR.

Using advanced features, continued

2Press 4 to choose Functions.

3Press 4 to display Go-To Search.

!

•If two recordings overlap, the index mark for the second program will be erased. Therefore, when you use the index feature to find the second program, the VCR will skip over it.

•If you record multiple programs in one recording session, the VCR will only find the index mark that was placed on the video cassette tape when the recording session began.

Searching a cassette tape for programs (indexing)

When you record a programs, the VCR places an index mark at the start of the recording. To search for an index mark:

1Press MENU to display the menu.

2Press 4 to choose Functions.

3Press 3 to choose Index Search.

4The tape counter is displayed on the screen. Input the tape counter you want to go and press REW or FF, the VCR will search for the time counter you want.

Marking a tape for zero search

1Use PLAY, REW,or FF to reach the point on the tape that you would like to mark as 0:00:00.

2Press DISPLAY to display the tape counter on the screen.

3Press CLEAR to reset the tape counter to 0:00:00.

4You can continue to play the tape or perform other functions with the VCR.

!Some index marks that may be missed by the VCR :

•A mark too close to your location on the tape.

•The mark at the beginning of a recorded segment of five minutes or less.

•The first index mark on the tape when you start at the beginning of the tape.

4If you want to search through a certain number of index marks, press two number buttons to enter the number of marks you want to search. Press CLEAR on the remote to correct an entry.

5Press REW to search backward or FF to search forward. The VCR will locate your index mark and begin playback. If you did not enter a specific index number, the VCR will locate the next index mark and begin playback. Press STOP to stop index searching.

Searching with the tape counter (go- to search)

You can mark a segment of the video cassette with the tape counter that will help you easily locate the segment later.

1Press MENU to display the menu.

Child Lock

To disable to usage of the VCR, or to protect your timer recordings, you can lock the VCR so that the buttons on the VCR or remote won’t work.

-To lock : Press and hold CHILD LOCK key on the remote for approximately six seconds.

-To release : Press and hold CHILD LOCK key on the remote for approximately six seconds.

29 Daewoo Video Cassette Recorder User’s Guide Daewoo Video Cassette Recorder User’s Guide 30