MOTOR SYNCHRONOUS AND VALVE REPLACEMENT (NON PUMP MODEL)

1Lay the front of the washer on the floor.

2Loosen two special screw of motor synchronous.

3Take out the wire of motor synchronous from the

braket.

4Separate the motor synchronous from the base.

5Turn the valve by using screw driver as shown in pic- ture.

6Remove the valve lid from the valve drain assy.

DIRECTIONS 15

Page 16
Image 16
Daewoo DWF-176S, Auto Washer service manual Motor Synchronous and Valve Replacement NON Pump Model