3. DIRECTIONS FOR INSTALLATION AND USE
INSTALLING PLACE
Install the washer on a horizontal solid floor. If the washer is installed on an unsuitable floor, it could make considerable noise and vibration.
10Cm
Keep the machine body more than 25cm apart from the wall surface. It will make easy cleaning the drain filter which is equipped at the back side of it. And if it comes into contract vibra- tion may occur.
Never install in these
●The place where it would be exposed to direct sunlight.
●The place nearby a heater or heat appli- ance.
●The place where it would be supposed to be frozen in winter.
●The kitchen with coal gas and a damp place like a bathroom.
■INSTALLATION OF THE UNDER BASE COVER [OPTION]
The packing box |
| Push the noise insulation plate |
|
|
| ||
1 opened, there is a |
| 2 into the end, which decrease |
|
noise insulation plate |
| the noise made by this washer. |
|
at the bottom of the back |
|
|
|
|
|
|
|
|
|
|
|
■HOW TO INSTALL ON AN INCLINED PLACE
Horizon | Check the Horizon |
1 Setting | 2 Status |
After controlling the height | Check the position of tub above |
by turning the adjustable | the center of the washer. |
leg, let the washer put |
|
down to the ground. |
|
NOTES
The openings must not be obstructed by carpet- ing when the washing machine is installed on a carpeted floor.
4DIRECTIONS
