x610 Series Layer 3 Gigabit Ethernet Switches Installation Guide
Power Supply Module Installation
Overview The x610-24Ts-POE+, x610-24Ts/X-POE+, x610-48Ts-POE+ and x610-48Ts/X-POE+ switches are supplied with a factory installed blank panel on the power supply slot. Either an AC or DC version of the 250W (AT-PWR250) power supply shown in Figure 43 and Figure 44, 800W
(AT-PWR800) power supply, shown in Figure 45 on page 81, or a 1200W (AT-PWR1200) power supply, shown in Figure 46 on page 82, can be installed in these switches. The installation procedure is identical for each type of power supply.
| DC PWR |
AT-PWR250 | FAULT |
100-240VAC~ 5A MAX |
|
| 2196 |
Figure 43. AT-PWR250 AC Power Supply
2197
Figure 44. AT-PWR250 DC Power Supply
| DC PWR |
AT-PWR800 | FAULT |
100-240VAC~ 12A MAX |
|
Figure 45. AT-PWR800 Power Supply
OUTPUT POWER
FAULT 
AIN 
POWERDC ONLYINSTALL AREA. 
CENTRALIZED CONNECTION, RESTRICTED 
FOR