x610 Series Layer 3 Gigabit Ethernet Switches Installation Guide
*The Maximum Power Level Output levels reflect the loss introduced by a 100 meter Ethernet cable between the Power Source Equipment (PSE) and the Power Device (PD).
A port connected to a network node that is not a PD functions as a regular Ethernet port, without PoE+. The PoE+ feature remains enabled on the port but no power is delivered to the device.
Note
On the 24 port x610 PoE+ switches, the PoE+ power supplied from ports 21R, 22R, 23R and 24R is unaffected by insertion of a SFP module into the corresponding SFP combo port.
On the 48 port x610 PoE+ switches, the PoE+ power supplied from ports 47R and 48R is unaffected by insertion of a SFP module into the corresponding SFP combo port.
Power Capacity Either a 250W
Table 13. PoE+ Ports Supported With
Model | Available | IEEE 802.3at | IEEE 802.3af | |
Class 3 | ||||
PoE Power | Class 4 (30W) | |||
| (15.4W) | |||
|
|
| ||
|
|
|
| |
|
|
|
| |
None | None | None | ||
|
|
|
| |
None | None | None | ||
|
|
|
| |
None | None | None | ||
|
|
|
| |
None | None | None | ||
|
|
|
|
57