Chapter 2: Virtual Chassis Stacking
Stack Member Identification
When a switch becomes a member of a VCStack it is assigned a Stack
STATUS LEDs on the switch’s front panel, shown in Figure 37.
STACK STATUS
MSTR FAULT
L/A 1 MASTER
L/A 2 RPS
PRES PWR
Figure 37. STACK and STATUS LEDs
The LEDs that indicate the switch’s status within the stack are shown in
Table 16.
Table 16. STACK LED Descriptions
LED | State | Description |
|
|
|
|
|
|
MSTR | Off | The switch is not part of a stack or is a member |
|
| unit of the stack. |
|
|
|
| Solid | The switch is the master unit of the stack. |
| Green |
|
|
|
|
L/A 1 | Off | Stack Port 1 has not established a link to a |
|
| stacking port on another VCStack stacking |
|
| module. |
|
|
|
| Solid | Stack Port 1 has established a link to a |
| Green | stacking port on another VCStack stacking |
|
| module. |
|
|
|
| Flashing | Stack Port 1 has established a link to a |
| Green | stacking port on another VCStack stacking |
|
| module and is sending or receiving packet |
|
| traffic. |
|
|
|
66