Allied Telesis X610-24TS/X-POE+, X610-48TS-POE+, X610-48TS/X, X610-24TS-POE+ Unpacking a Switch

x610 Series Layer 3 Gigabit Ethernet Switches Installation Guide

Unpacking a Switch

To unpack a switch, perform the following procedure:

1. Remove all components from the shipping packages.

Note

Store the packaging material in a safe location. You must use the original shipping material if you need to return the unit to Allied Telesis.

2.Place the switch on a level, secure surface.

3.For a non-PoE switch, make sure the following components are included in your switch package. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance.

One non-PoE x610 Series Layer 3 Gigabit Ethernet Switch

Two rack-mount brackets

Twelve flathead Phillips rack-mount bracket screws

Four regional AC power cords (Americas, Australia, EU, Japan, and UK only)

One AC power cord retaining clip

One management cable for local management

4.For a PoE switch, make sure the following components are included in your switch package. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance.

One PoE x610 Series Layer 3 Gigabit Ethernet Switch

Two rack-mount brackets

Twelve flathead Phillips rack-mount bracket screws

One management cable for local management

77