![](/images/new-backgrounds/1007421/742115x1.webp)
2.3.3 CAPACITOR
1. Remove the cabinet. (Refer to section 2.1.2)
2. Remove the screw and the clamp which fastens the capacitor.
3. Disconnect all the leads of capacitor terminals.
4.
Tem |
|
|
|
|
perat |
|
|
|
|
ure | Med |
|
|
|
Warmer |
|
|
| |
Fan | Off |
| ||
Cooler |
|
|
| High |
| Low |
|
| Cool |
| Fan |
|
|
|
|
| Low | Cool | Med |
|
|
| ||
|
|
|
| Cool |
Mode
Figure 11
2.3.4 POWER CORD
1.Remove the cabinet. (Refer to section 2.1.2)
2.Disconnect the grounding screw from the control box.
3.Disconnect the 2 receptacles.
4.Remove a screw which fastens the clip cord. (See Figure 12)
5.Remove the power cord.
6.
(Use only one | for ground |
connection.) |
|
7.If the supply cord of this appliance is damaged, it must be replaced by the special cord. (The special cord means the cord which has the same specification marked on the supply cord attached at the unit.)
2.3.5 THERMOSTAT
1.Remove the cabinet. (Refer to section 2.1.2)
2.Remove the 2 screws which fasten the thermostat.
3.Disconnect 2 leads of thermostat terminals.
4.Remove the thermostat.
5.
2.3.6 ROTARY SWITCH
1.Remove the cabinet. (Refer to section 2.1.2)
2.Remove the 2 screws which fasten the rotary switch.
3.Disconnect all the leads of the rotary switch terminals.
4.Remove the rotary switch.
5.
Figure 12
Figure 13
Figure 14
— 8—