Friedrich SV12A10, SV10A10, SV08A10 manual Casement Window Installation, Curtain

8. Slide curtain into curtain frame. Slide curtain frame

assembly into side guides of the air conditioner

cabinet. Make sure curtain is firmly enclosed on all

sides by the frame. (See Figure 27)

9. Cut side guide seal into 2 equal lengths. Remove

protective backing and apply it to the rear side of

cabinet side guides, starting just below curtain frame

assembly. Pinch off excess length so seal is even with

the bottom of side guide. (See Figure 28)

10. Place air conditioner in window opening. It should sit

on bracket assembly so that curtain frame and

Curtain Frame

Figure 27 Curtain

	cabinet side guides are against top and side window
	jambs. Mate front of bracket with base guide
	attached to the bottom of base pan.
11.	Drill 1/8 inch holes in window track through the
	existing holes on base guide. Screw 4-type C screws
	through the holes. (See Figure 29)
12.	If this is a casement window installation, proceed to
	casement window installation. If not, slide inner
	window sash firmly against side of the cabinet.
13.	Drill 1/8 inch hole in window jamb to align with the
	existing holes in the curtain frame. Attach curtain
	frame to window frame with 2-type B screws. (See
	Figure 29)

NOTE: Check all seals and plug any remaining air gaps with a suitable weatherproof caulk.

14.If this is a casement window installation, proceed to casement window installation. If not, stuff the foam seal strip between the vertical sash and the window glass. (See Figure 30)

15.Attach the window locking bracket with a type B screw. (See Figure 30)

Figure 28

Base pan

Base Guide Bracket

Type C screw

Window Track

Figure 29

Apply weather seal to side guides just below edge of Curtain Frame.

Type B screw

3.7CASEMENT WINDOW INSTALLATION

•Installation procedure is the same as that described in steps 1 through 11 and step 13 of the horizontal sliding window installation.

•If the window opening is wider than 15-3/4 inches you will need to install a filler panel. Make this panel from 3/4 inch thick wood and run it the full length of the window. Attach it securely to the window frame and paint it to protect it from the weather.

•Since styles and sizes of casement windows vary widely, it is advisable to have the air conditioner installed by someone skilled in this type of installation.

Foam seal strip

Window locking bracket

Figure 30

— 15—