HOW TO CHECK THE CLUTCH SPRING PROBLEM
PROBLEM
1)THE LAUNDARY IS IN THE SPIN TUB UNEVENLY WHEN JUST STARTING SPIN PROCESS.
2)THEREFORE, IT CAUSE THE SERIOUS NOISE AND VIBRATION WHEN WASHING AND SPINNING PROCESS OR SUPPLING WATER IRREGULARY WHEN SPINNING PROCESS
AND CAUSE SHORT OF SPIN PERFORMANCE.
CHECKING METHOD
IN THIS CASE, YOU MUST EMPTY THE SPIN TUB FIRST.
1)TO CHECK THE REVOLUTION OF SPIN TUB. IF THE SPIN TUB DOES NOT REVOLVE AND ONLY THE PULSATOR IS TURNING, THAT IS CLUTCH SPRING DEFECT.
2)TO CHECK THE SPIN SPEED(RPM) BETWEEN SPIN TUB AND PULSATOR.
IF YOU FIND THE DIFFERENT SPIN SPEED BETWEEN SPIN TUB AND PUSATOR, THIS IS ALSO CLUTCH SPRING DEFECT.
IN THIS CASE, WE ARE GOING TO SUPPLY THE CLUTCH BOSS ASSEMBLY INSTEAD OF GEAR MECHANISM ASSEMBLEY. PLEASE REFER TO FOLLOWING FIG.
THE CLUTCH BOSS ASSEMBLY
NO. | PARTS NAME | SPECIFICATION | CODE | Q’TY |
1 | CLUTCH SPRING | 1.5*1.5 | 3615110000 | 1 |
2 | CLUTCH BOSS | PP | 3619301300 | 1 |
|
|
|
|
|
3 | GREASE | beacon#325 3g |
|
|
|
|
|
|
|
PACKING | PACKING THE CLUTCH BOSS ASS’Y |
| 1 | |
METHOD | BY USING VINYL PACK |
|
| |
|
|
|
|
|
CLUTCH BOSS ASS’Y PART CORD : 3619301400
THE REPAIR 17
