16
Cleaning the Lint FilterCleaning the water inlet filter
Clean the filter when water leaks from, the water inlet.
Cleaning the drain filter
In case U shape drain hose, this filters equipped at the cack side of washer.
This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ...
If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could be
caused. see page
!Pull the Filter frame up-
ward.
@Turn the lint filter inside
out, wash to the lint off
with water
#Return the filter as it was,
and insert the filter frame
into the slot
!Pull the power
plug out before
cleaning it.
@Turn off the water
supply to the
washer and
sperate the inlet
hose.
#Pull the inlet filter
out.
$Remove the dirt
from the inlet
filter with a brush.
!Put down the remained
water in the hose. And put
a container under the filter
to collect water.
@Turn the cap counter
clockwise.
#Pull out the filter
assembly off the case of
the main body.
$Clean the drain filter
removing the foreign
stuffs.
%Put in the filter along the
guiding prominence of the
case. Please note the left
position of the filter
adjusting the groove to the
guide rib.
^Turn the cap clockwise
tightly.
Filter Frame
Lint Filter
FILTER CONTAINER
CAP
CAP
FILTER
CASE
GUIDE
RIB
SUIT
CAP
CASE
FILTER
CAP
CAP