CONTROLS
SETTING THE CLOCK
When the oven is first plugged in, the display will flash “:0”. If the AC power ever goes off, the display shows “:0” when the power comes back on.
1. Touch the CLOCK pad.
This is a 12 hour clock system.
2.Touch the CLOCK pad once more.
This is a 24 hour clock system.
3.Enter the correct time of day by touching the time set pads in sequence.
4.Touch the CLOCK pad.
The display stops blinking, and the colon starts blinking. If you select 12 hour clock system, this digital clock will allow you to set from 1:00 to 12:59. If you select 24 hour clock system, this digital clock will allow you to set from 0:00 to 23:59
NOTE: If you attempt to enter an incorrect time, the time will not be set and it will return to previous status. Touch the CLOCK pad and
TIME DEFROSTING
When DEFROST is selected, the automatic cycle divides the defrosting time into periods of alternating defrost and stand times by cycling on and off.
1.Touch the DEFROST pad.
2.Touch the time set pads for the desired defrosting time.
3. Close the door.
The DEFROST indicator lights and “:0” is displayed.
The display will show what you touched
Note : Your oven can be programmed for 59 minutes 90 seconds(59 : 90)
4. Touch the START pad.
When you touch the START pad, the DEF indicator starts blinking to show the oven is in the DEFROST mode. The display counts down the time to show you how much defrosting time is left in the DEFROST mode. Halfway through defrosting time, turn over, break apart and or redistribute the food.
7
