PIR settings (Figure 4)
The jumpers settings are as follows:
Range: | High: more than 50 feet |
| Medium: |
| Low: less than 20 feet |
LED: | ON: LED will flash when it detects |
| OFF: LED is always dark |
Filter: | ON: set for outdoor use |
| OFF: set for indoor use |
Reset: | 10 seconds to reset after activation |
| 120 seconds to reset after activation |
Note: If the range is set to “low,” the filter should be set to “off” or the detection will be limited.
Figure 4
PIR with cover removed
Reset Filter LED Range
7.