Extron electronic ISS 408 Recalling a user preset, Auto imaging an input

3-7ISS 408 Integration Seamless Switcher • Operation
Recalling a user preset
There are three user presets per input. The presets save color, tint, contrast,
brightness, detail, sizing, and centering settings. See “User Presets menu”, later in
this chapter, to save and erase presets. Cycle through and recall these memories by
repeatedly pressing the appropriate input button. The LCD panel identifies the
recalled preset (figure 3-9).
3
3
3
3
Press Button
User Preset #2
Recalled User Preset #3 Recalled User Preset #1 Recalled User Preset #2 Recalled
3
3
Press Button
3
3
Press Button
Figure 3-9 — Recalling user presets
Auto imaging an input
The auto imaging feature automatically sizes and centers the selected input to fill
the screen. Command the auto imaging feature for a specific input by pressing and
holding the appropriate input button until the LCD displays the message
Auto Image Input #n. Release the input button then press and release the input
button again. The LCD displays AutoSizing and Centering Please Wait... until the
operation is complete.
Alternatively, using the menu system, you can set this feature to apply the Auto
Image adjustments to every input as it is selected (see “Auto Imaging and Auto
Memories submenu”, later in this chapter).