Dakota Alert DCMT-2500, Dakota Alert owner manual Operation Always test unit prior to installation

Operation: (Always test unit prior to installation)

1.Using a Phillips screwdriver, remove the screws (Figure 1, A-D) at each corner of the DCMT until the transmitter separates into two pieces.

Figure 1

AB

CD

Figure 2

2.Connect a 9-volt alkaline battery to the transmitter (Figure 2).

3.For maximum range between the transmitter and receiver, the transmitter should be mounted on a wooden post or tree (steel posts may cause interference with the radio signal). Although the maximum range is about a 1/2 mile, obstructions such as hills, trees, metal siding and stucco can reduce the range.

9-volt Battery

3.