9
English
Important cables
There is one area where you can significantly influence the sound quality
-the cables between amplifier and speaker. This is a case where the rule 'any chain is only as strong as its weakest link' definitely applies. The fine and detailed signal from the amplifier must be conveyed to the speakers with minimum loss. The table below shows the maximum length your cables should be.
Cable cross section | AWG | Maximum length | |
|
|
|
|
1,0 mm2 | 18 (17) | 15 meter | 50 feet |
|
|
|
|
1,5 mm2 | 16 | 22 meter | 75 feet |
|
|
|
|
2,0 mm2 | 14 | 30 meter | 100 feet |
|
|
|
|
3,0 mm2 | 12 | 45 meter | 150 feet |
|
|
|
|
AWG: American Wire Gauge
DALI recommends using cables of at least 1.0 mm2 in cross section. How- ever, it is not just the cross section that is crucial to the sound. The actual structure of the cable and the materials employed can have a great influ- ence on the sound image. We therefore recommend that you only use cables manufactured for this purpose. You can purchase DALI Wave cables from your authorised dealer, who will also be able to advise you on the best type for your requirements. Here is a cross section of the DALI Wave cables:
DALI White Wave: | 1,5 mm2 |
DALI Red Wave: | 3,0 mm2 |
DALI Silver Wave: | 3,0 mm2 |
WAVE
Remember that the tone controller is only intended for minor adjustments.
