1.THERMOSTAT DIAL: For controlling the temperature inside the refrigerator/freezer. Turns the motor on as soon as the temperature rises above the desired level.
2.FREEZING COMPARTMENT WITH REVERSIBLE FREEZER DOOR: Separate freezer section holds ice cube tray and frozen foods
3.ICE CUBE TRAY: Ice cubes are easily removed from the tray. (Not shown)
4.PLASTIC COATED SHELVES: 3 full width shelves, 2 half shelves are odor resistant, rustproof and removable for easy cleaning.
5.DRIP TRAY: Catches the water that drips off the evaporator when defrosting.
6.MAGNETIC GASKET: Tight fitting door seal keeps all the cooling power locked inside. No hooks or latches.
7.CRISPER WITH
8.CANSTOR DOOR LINER: Holds 355 mL cans of pop,
juice, or beer.
9.All Purpose Storage Container: for eggs, butter cheese etc. can also be used to collect defrost water during defrost cycle.
2
6
8
1
5
4
Door Reversal Instructions
CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you during the door reversal process.
1.To access the lower hinge assembly, tilt back the refrigerator cabinet or lay the refrigerator on its back. (Fig. C)
2.Remove both leveling legs located at the front of the cabinet.
3.Remove the screws holding the lower hinge assembly to the cabinet.
4.Remove the main door assembly from the refrigerator cabinet. (open door and pull down)
5.Remove (unscrew) the main door top hinge pin. (Fig. D)
6.
7.Remove the door plug and door bushing located on the top of the main door assembly.
8.Interchange positions. (ie. door plug right side, door bushing left side.)
9.
10.Remove door bushing (bottom door) and install on opposite side.
11.
12.Make sure the door assembly is properly aligned on the cabinet, before tightening lower hinge screws.
13.
Fig. C
7
Fig. D
5
