Operating Instructions
CONTROLS
SELECTOR SWITCH: The selector switch controls fan speed and/or cool- ing speed. To set desired cooling temperature, simply rotate the SELECTOR knob to the appropriate setting.
FAN SPEEDS:
•LOW FAN
will circulate air at minimum speed without cooling.
•HIGH FAN 
will circulate air at maximum speed without cooling.
COOLING MODES:
•LOW COOL 
provides cooling with minimum air circulation. Recommended for
•HIGH COOL 
provides cooling with maximum air circulation. Recommended for quick cooling or for extremely hot days. Once room is cooled, reduce setting to LOW COOL.
•OFF
NOTE: Always allow 3 minutes before switching from one mode to another.
THERMOSTAT: The thermostat automatically controls the (compressor) cooling cycle and maintains the selected room temperature. To set the thermostat, rotate the thermostat knob to the desired cooling setting (1 warmest - 7 coldest). The fan motor will continue to operate after the com- pressor (cooling) has cycled off. This is normal.
IMPORTANT
When using FAN control, turn selector switch slowly, allowing unit to adjust. When using THERMOSTAT, be sure to allow three min- utes before changing temperature. Adjusting too quickly may cause compressor to overload.
Thermostat
Selector
Switch
OFF arrêt
8
