Danby DAC8010E Using The Remote, Controller, Buttons, Auto Operation, available, conditioner

Operating Instructions

USING THE REMOTE
CONTROLLER	1		2
BUTTONS	ON/OFF		MODE
	3		3
	TEMP	S	TEMP
	UP		DOWN
		ENERGY
		SAVER
	FAN		TIMER
	CLEAN		SLEEP
	AIR

AUTO OPERATION

Ensure the unit is plugged in and power is available.

1)Press the ON/OFF button to start the air conditioner.

2)Press the mode button and select AUTO.

3)Press the TEMP UP / DOWN button to set the desired temperature. The temperature can be set within a range of 17°C~ 30°C in 1°C increments.

NOTE

1.In the Auto mode, the air conditioner can logically choose the mode of Cooling, Fan, Heating and Dehumidifying by sensing the difference between the actual ambient room temperature and the set temperature on the remote controller.

2.In the Auto mode, you can not switch the fan speed. It has already been automatically controlled.

3.If the Auto mode is not comfortable for you, the desired mode can be selected manually.

			COOLING /HEATING/FAN OPERATION
			Ensure the unit is plugged in and power is
1		2	available.
ON/OFF		MODE
3		3 1) Press the ON/OFF button to start the air
TEMP	S	TEMP	conditioner.
UP		DOWN	2) Press the MODE button to cool, heat
4	ENERGY		(cooling and heating models only) or fan
	SAVER
FAN		TIMER	mode.
			3) Press the TEMP UP / DOWN button to
CLEAN		SLEEP	set the desired temperature. The
AIR			temperature can be set within a range of

17°C~ 30°C in 1°C increments.

4)Press the FAN button to select the fan speed in three steps- Low, Med,or High.

NOTE:

In the Fan mode, the setting temperature is not displayed in the remote controller and you are not able to control the room temperature either. In this case, only step 1, 3 and 4 may be performed.

				DEHUMIDIFYING OPERATION
			2	Ensure the unit is plugged in and power is
1				available.
ON/OFF		MODE
3			3 1) Press the ON/OFF button to start the air
TEMP	S	TEMP		conditioner.
UP		DOWN		2) Press the MODE button to select auto.
	ENERGY
				3) Press the TEMP UP / DOWN button to
	SAVER
FAN		TIMER		set the desired temperature. The
				temperature can be set within a range of
CLEAN		SLEEP		17°C~ 30°C in 1°C increments.
AIR

NOTE:

In the Dehumidifying mode, you can not switch the fan speed. It has already been automatically controlled.

11