Trouble Shooting
Before You Call For Service
Problem | Possible Cause What to do |
No Power. | A fuse in your home may |
| be blown or the circuit |
| breaker tripped. |
Replace fuse or reset circuit breaker.
Power surge.
Plug not fully inserted into wall outlet
Unplug the beverage center, wait a few seconds and then plug it back in.
Make sure the
Cabinet Temperature | Temperature setting | Verify the temperature control setting. |
too High |
| adjust if neccessary |
| Door not shut properly | Ensure that the door is fully closed |
| or opened excessively | and that the gasket is sealing. against |
|
| the cabinets. Open the doors only as |
|
| needed and for short periods of time |
| Interior lights toggled on | The interior lights are intended for |
|
| temporary lighting of cabinets for |
|
| display purposes only. They are not |
|
| intended to be left on for prolonged |
|
| time periods |
Exhaust vent is obstructed
Recently added a large quantity of warm beverages to the cabinet
Verify there is nothing blocking the front mounted exhausting vent.
Limit the quantity of warm beverages being introduced to the cabinet at the same time. Attempt to stagger the load introduction if possible.
Condensation on the | High humidity conditions | The condensation will subside once |
cabinet and/or doors | in the home. | humidity conditions return to normal. |
| Door not shut properly | Ensure that the door is fully closed |
| or opened excessively | and that the gasket is sealing. against |
|
| the cabinets. Open the door only as |
|
| needed and for short periods of time |
If none of the above rectify the situation please contact our customer care department
at 
11