Operating Instructions

The Controls of your

Beverage Center

1.

Indicator light illuminates to signify the

 

cooling mode is currently in operation.

3

°C

°F

2.‘’ Button

To control this appliance turn ON/OFF ( press and hold this buttons for approximately 3 seconds).

3.‘ ’ Button

To control the inner light turn ON/OFF. (If press this botton,the inner light is not controled by The extrusion-board of lamp swith and keep lighting.)

4. °C / °F

Adjacent indicator light denotes which scale of temperature is displayed.

5.‘ ’ Button

Used to raise (warmer) the temperature

in 1° degree increments.

‘’ Button

Used to decrease (cooler) the temperature in 1° degree increments.

Setting the Temperature

•To switch the display between the Fahrenheit (°F)

and Celsius (°C) scale,

depress theand control buttons simultaneou- sly for approximately 3 seconds.

•The temperature range can be set as low as 39°F (4°C) or as high as 64°F (18°C) to suit your specific storage requirements. Each depres-

sion of the or button will allow you adjust the temperature in 1° degree increments within the aforementioned range.

When you plug in your beverage center for the first time, the temperatures will automatically be set to 54°F

(12°C) and will be displayed in the Fahrenheit scale (°F).

Function

Instructions

NOTE !

If put in too more bottles of wine at one time or the door is not been closed tightly,then there may show signal "HI"at the diapaly panel.This is the normal phenomenon,please wait for a while after close the door, ”HI” will disappear.

It is normal that the the cabinet shows “HI” or “LO” between times, If it occurs frequently or last for a long time, you can get power off then restart to solve it. If the problem occurs once again after restart, Please contract the after- sale service for help.

•Temperature Memory Function

In the event of a power interruption, wine cooler can remember the previous temperature settings, and when the power is recovery,the cabinet temperature will go back the same setting temperature as power off.

•Door Close Reminding Alarm Function

When you forget close the door or the door is not closed completely, the buzzer alarm after 5 minutes. Please close the door completely and advoid the cold energy was lost.

•Temperature Alarm Function

If the inner temperature is higher than 74°F(23°C), “HI” will be illuminated on the display panel and the buzzer alarm will come on after one hour. This informs that the inner temperature of the unit is too high, please check the unit and fix the problem.

If the inner temperature is lower than 34°F(1°C), “LO” will be illuminated in the display panel. Also the buzzer alarm and the malfunction indicator light will be illuminated at the same time.

6