| KEY PAD FUNCTIONS |
8 | 1 |
| 4 |
2 | 5 |
| |
3 | 7 |
6 |
1)LED Readout (ROOM HUMIDITY): The LED window displays the following information independently:
A) Internal (Room/Environment) Relative Humidity Conditions
B) Set Operating Relative Humidity Value.
NOTE: The LED readout is programmed to default to display the ambient relative humidity conditions.
To view the Set Operating Relative Humidity Value, press the “up” or “down” button (once) and the set RH operating value will flash for approximately 5 seconds in the LED window, then revert back to display the internal RH value.
2)ON/OFF Button: Each time this button is pressed the unit turns ON (adjacent indicator light illuminates) or Off (adjacent indicator light is not illuminated)
3)CONTINUOUS: Used for Continuous Dehumidifier Operation (unit will run
4)HUMIDITY UP: This button allows you to increase the relative humidity setting. Each time this button is pressed, the RH value set- ting is increased incrementally by 5% (ranging from 35% - 80%)
5)HUMIDITY DOWN: This button allows you to decrease the relative humidity setting. Each time this button is pressed the RH value setting is decreased incrementally by 5% (ranging from 80% - 35%).
6)HIGH FAN: The adjacent (green) indicator light illuminates when HIGH FAN is selected.
7)LOW FAN: The adjacent (green) indicator light illuminates when LOW FAN is selected.
8)WATER FULL INDICATOR: This (red) light illuminates under the following conditions:
A)When the internal water tank is not properly installed inside the cabinet.
B)When the internal water tank is full. The water tank must be emptied and replaced back in the cabinet before normal operating conditions can resume.
6
