Danby DER2009W Read And Save These Instructions, Important Safety Instructions, Before Starting

INSTALLATION INSTRUCTIONS ELECTRIC AND CERAN-TOP RANGES

READ AND SAVE THESE INSTRUCTIONS

WARNING:

•If the information in this manual is not followed exactly, a fire or electrical shock may result causing property damage, personal injury or death.

•This appliance must be properly grounded.

IMPORTANT:

•Save these instructions for the local electrical inspector’s use.

•Observe all governing codes and ordinances.

BEFORE STARTING

INSTALLER:

•Read all instructions contained in these installation instructions before installing range.

•Leave installation instructions with homeowner.

•Proper installation is the responsibility of the installer.

HOMEOWNER:

•Keep installation instructions for future reference.

PARTS INCLUDED

•Anti-Tip bracket

•Anchor sleeves

•Bolts

TOOLS YOU WILL NEED

•	Adjustable wrench or channel lock pliers	•	Tape measure
•	Phillips screwdriver	•	Safety glasses
•	Electric or hand drill	•	Pencil
•	Wood floors: 3/16” drill bit	•	Level
•	Concrete/ceramic floors: 13/32” carbide-	• Hammer (may be needed for anchors)
	tipped masonry drill bit
•	3/8” nut driver

IMPORTANT SAFETY INSTRUCTIONS

WARNING: For personal safety, remove house fuse or open circuit breaker before beginning installation.

Failure to do so could result in serious injury or even death.

•All clearances and spacing dimensions must be met for safe use of your range.

•Be sure your appliance is properly installed and grounded by a qualified technician.

ANTI-TIP DEVICE

WARNING: To reduce the risk of tipping, the range must be secured by properly installed anti-tip bracket

provided with the range.

All ranges can tip.

•Injury to persons could result.

•Install anti-tip device packed with range.

•See Installation Instructions.

If you pull the range out and away from the wall for any reason, make sure the Anti-Tip bracket is engaged when the range is pushed back against the wall.