INSTALLATION INSTRUCTIONS (cont’d)
DOOR REVERSAL
INSTRUCTIONS
To avoid personal injury to yourself and/or property, we recommend someone assists you during the door reversal process.
1)To access the lower hinge assembly, tilt back the refrigerator or lay the refrigerator on its back (Fig. 1).
2)Remove both leveling legs located at the front of the unit.
3)Remove the screws holding the lower hinge assembly to the refrigerator (Fig. 1).
4)Remove the main door assembly from the unit (open door and pull down).
5)Remove the screws from the middle hinge assembly. Then remove the hinge and refrigerator door (open door and pull down) (Fig. 2).
6)Loosen top hinge screws. Remove top hinge from current position and install with holes on other side of door. (Fig 3)
7)Remove the door plug and door bushing located on the top and bottom of each door assembly (Fig. 2).
8)Interchange positions (ie. door plug right side, door bushing left side).
9)
10)
11)Make sure the door assembly is properly aligned on the unit before tightening the hinge screws.
12)
13)
14)Make sure the door assembly is properly aligned on the unit before tightening lower hinge screws.
15)
THE PROCESS IS NOW COMPLETE.
Fig. 1
Fig. 2
Fig. 3
2
