Danby DPAC120061 owner manual Fan Operating Instructions, Low-Med-High

Fan Operating Instructions

NOTE: The exhaust hoses are not required during FAN only mode operation.

1)Press the I/O (on/off) key pad to switch on the unit. See Fig H(1).

2)Press the MODE key (Fig H(2)) until the FAN symbol illuminates in the display window. Each depression of the MODE key will advance to a different mode setting (Cool-Dry-Fan).

3)Press the FAN key to select the desired FAN SPEED setting. Your selection will appear in the display window (Fig I). Each depression of the fan key will advance to a different fan speed

(Low-Med-High).

4)Press the SWING key to activate the automatic air swing (oscillating) feature (the air swing symbol will appear in the display window, Fig J). To deactivate the air swing feature, press the SWING key again.

5)To adjust “air flow” direction, (up / down only) adjust the center Horizontal Louver Blade and the remaining louvers will automatically adjust to the same position. See Fig. 25

Fig. 25

12

Fig H

Fig I

Fig J

12