Danby DPAC 13009 operating instructions Dehumidifier, Fan

OPERATING INSTRUCTIONS (cont’d)

DEHUMIDIFIER

Note: During dehumidifier mode, the exhaust hose does not have to be vented outdoors.

1)Press the ON/OFF key pad to switch the unit on (Fig. H)

2)Press the MODE key (Fig. I) until the DRY indicator illuminates on the control panel (Fig. J). Each press of the MODE key will advance to a different mode setting (Cool-Dehumidifier-Fan-Auto).

IMPORTANT: the drain hose must be installed during dehumidifier mode

3)When the dehumidifier mode is activated, the transparent ring around the button on the front of the device (Fig. K) emits an ORANGE light.

IMPORTANT: There is no fan speed or temperature adjustment during dehumidifier mode. The fan speed is factory set for Auto and the dehumidifier operates continuously (non-stop) regardless of ambient humidity level or set temperature.

Fig. H

Fig. J

Fig. I

Fig. K

Dehumidifier mode (orange)

FAN	NOTE: During Fan Mode, the exhaust hose does
	not have to be vented outdoors.

Fig. L

1)Press the ON/OFF key pad to switch the unit on (Fig. H).

2)Press the MODE key (Fig. I) until the FAN indicator illuminates on the control panel (Fig. L). Each press of the MODE key will advance to a different mode setting (Cool-Dehumidifier-Fan-Auto).

3)Press the FAN Key (Fig. M) to select the desired FAN SPEED setting. Your selection will appear on the control panel. Each press of the fan key will advance to a different fan speed (High- Med- Low) as shown in Fig. N.

4)When the fan mode is activated, the transparent ring around the button on the front of the device (Fig. O) emits a GREEN light.

Fig. M

Fig. N

High

Med.

Low

Fig. O

Fan mode (green)

9