DOOR REVERSAL INSTRUCTIONS
• If you find the direction of opening the door on your appliance inconvenient, you can change it. Holes on the opposite side have already been prepared in the factory.
1Tilt the unit slightly towards the rear and prop it securely. Two
people are required to tilt the unit during the door reversal process.
2 On the top of the unit, remove the 4 screw covers, then undo the screws underneath.
3Lift the top cover away from the fridge.
unscrew
4 Remove the three screws. Then remove the upper hinge that holds the door in place. Lift the door and place it on a padded surface to prevent it from scratching.
180°
5 Remove the bolt with a screwdriver and flip the hinge bracket. Then
6 Take off the middle hinge by removing the screws. Then lift the lower door and place it on a padded surface to prevent it from scratching.
7Move the hinge hole covers on the panel between the fridge
and freezer from the left side to the right side.
8 Remove the adjustable feet from both sides. Remove the screws and the bottom hinge.
Unscrew
6
