INSTALLATION INSTRUCTIONS

Be sure the appliance is properly installed and grounded by a qualified technician. It is the responsibility of the technician to be certain that your range is properly installed. Situations caused by improper installation are not covered under the warranty. Any expenses incurred due to such situations will not be paid by the manufacturer of the appliance.

WARNING: To reduce the risk of tipping the appliance by abnormal usage or improper door loading, the appliance must be secured by properly installing the anti-tip device packed with the appliance. To check if the device is installed and engaged properly, carefully tip the range forward. The anti-tip device should engage and prevent the range from tipping over.

If this range is removed for any reason, service or cleaning etc,. it must be replaced as outlined in the installation instructions, before placing the range back in operation.

LEVELING A FREE

STANDING RANGE

All free-standing ranges must be level to obtain proper cooking results. The leveling legs should be screwed into the corner brackets. Place a level, or a pan or measuring cup partially filled with water, level on oven rack. Adjust leveling legs until the range is level. The top of the side panels should be level with countertop or work surface.

IMPORTANT: Be sure to keep the leg levelers. Leveling of the range is very important.

GAS CONNECTIONS

Have the dealer where you purchased your new range install or recommend a qualified installer. Installation must conform with local codes. The range should be connected to a supply line with 1/2-inch black iron pipe or a certified flexible type stove connector. To prevent gas leaks, put an approved sealing compound, which is resistant to liquefied gases, on all threaded connections.

IMPORTANT: Do not apply pressure directly to the range manifold pipe when tightening supply connections. The manifold pipe should be held securely at the pressure regulator to prevent twisting. Hold the pressure regulator with a wrench during the tightening of the connection, or the manifold pipe may be twisted and split, causing a dangerous leak.

Note: The installation of ranges designed for manufactured (mobile) homes must conform to specific standards and local codes.Check all piping connections in the unit for leaks. Never use an open flame to check for gas leaks. It is possible for connections made at the factory to leak due to vibrations encountered in transportation. Have any suspected leaks repaired before use by a qualified service personnel.

ELECTRICAL

Your range is grounded with a three-conductor (three-prong plug) supply cord which

CONNECTIONS

will ground the range when plugged into a similar grounded wall receptacle.

 

 

If the backgaurd of the range has a clock or light, connect the cord from the backgaurd into the special terminal block located at the top of the main back directly under the backgaurd supply cord.The appliance must be electrically grounded when installed in accordance with local codes.

5

Page 5 Page 7
Page 6
Image 6
Danby DR3099BLGLP, DR3099WGLP Installation Instructions, Leveling a Free Standing Range, GAS Connections, Electrical
Page 5 Page 7

DR3099WGLP, DR3099BLGLP specifications

The Danby DR3099BLGLP and DR3099WGLP are premium portable air conditioning units designed to provide optimal cooling for spaces up to 550 square feet. These units combine modern technologies and features to ensure maximum comfort, energy efficiency, and versatility.

One of the standout features is the dual cooling technology, which enables both efficient cooling and dehumidifying functions. With a cooling capacity of up to 14,000 BTUs, these air conditioners can effectively maintain a comfortable environment even in the most sweltering heat. The dehumidifying function is essential for reducing indoor humidity levels, making it particularly beneficial in humid climates.

The DR3099 series units are also equipped with an energy-efficient design, boasting an Energy Efficiency Ratio (EER) that minimizes energy consumption while maximizing cooling performance. This translates to noticeable savings on electricity bills, making them an economical choice for consumers.

Users will appreciate the highly intuitive LED display panel, which allows for easy monitoring and adjustments to the desired temperature settings. The remote control enhances convenience, allowing users to change settings from a distance without interrupting their leisure activities.

For enhanced comfort, the units feature four different modes: cool, fan, dry, and auto, catering to various cooling needs throughout the year. The fan-only mode is particularly useful for gentle air circulation while the dry mode aids in moisture removal, maintaining a pleasant indoor atmosphere.

Portability is another key characteristic of the Danby DR3099 models. Each unit is equipped with caster wheels and a built-in handle, allowing for easy movement from room to room. Additionally, the quick installation kit included with the units ensures a hassle-free setup, enabling users to start enjoying cool air almost immediately.

The sleek design of both models, available in black (DR3099BLGLP) and white (DR3099WGLP), seamlessly integrates into any room aesthetic. Noise levels are maintained at a minimum, ensuring a quiet operation that doesn’t disturb daily activities or sleep.

With their impressive cooling capabilities, energy efficiency, versatile modes, and user-friendly features, the Danby DR3099BLGLP and DR3099WGLP are excellent choices for those looking to enhance their indoor comfort during hot months.
Top Page Image Contents