TROUBLESHOOTING

Before you call for service, review this list of troubleshooting solutions. If none of the below suggestions rectify the problem, contact the Danby customer service department TOLL FREE: 1-800-26-

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

1) Surface burners do

• Surface Control knob has not been

• Push in and turn the Surface Control

completely turned.

knob until burner ignites and then turn

not light

• Burner ports are clogged.

control knob to desired flame size.

 

• Range power cord is disconnected from

• With the burner off, use a small-gauge

 

outlet.

wire or needle to clean ports.

 

• Electrical power outage.

• Be sure cord is securely plugged into

 

 

the outlet.

 

 

• Burners can be lit manually. Check

 

 

house lights to be sure. Call your local

 

 

electric company for service.

 

• Burner ports are clogged.

• With the burner off, use a small-gauge

2) Surface burner

• Moisture is present after cleaning.

wire or needle to clean ports.

flame burns half way

 

• Lightly fan the flame and allow burner

around

 

to operate until flame is full. Dry the

 

 

burners thoroughly.

3) Surface burner

• Dust particles in main line.

• Allow the burner to operate a few

• In coastal areas, a slightly orange flame

minutes until flame turns blue.

flame is orange

is unavoidable due to salt air.

• This is normal; no action necessary.

 

 

 

 

4) Poor baking results.

• Many factors affect baking results.

• Make sure the proper rack position is

• Be sure regulator gas valve is “ON”.

used. Center food in the oven and space

 

 

pans to allow air to circulate. Allow the

 

 

oven to preheat to the set temperature

 

 

before placing food in the oven. Try

 

 

adjusting the recipes recommended temp.

 

 

or baking time.

 

 

• See Installation Instructions.

 

• Your oven will most likely smoke after

• This is normal, especially for high oven

5) Flames inside oven

a spillover has occurred.

temperatures, pie spillovers or large

or smoking from vent

 

amounts of grease on oven bottom. Wipe

 

 

up excessive spillovers immediately.

 

 

 

 

• Meat too close to the broil burner.

• Reposition the rack to provide more

6) Oven smokes

• Meat not properly prepared.

clearance between the meat and the broiler.

excessively during

• Broiler drawer needs to be cleaned.

• Remove excess fat from meat. Slash

broiling

• Broiler drawer is open.

remaining fatty edges to prevent curling,

 

 

but do not cut into the lean.

 

 

• Excessive smoking is caused by a build up

 

 

of grease or food spatters. If the broiler is

 

 

used often, clean on a regular basis.

 

 

• Broiler door should be closed when

 

 

broiling.

 

• The door is out of position.

• Because the oven door is removable, it

7) Oven door is

 

can become out of position during

crooked

 

installation. To straighten the door, see

 

 

“Care and Cleaning” in this manual.

8) Oven light does not

• Replace or tighten bulb.

• See “Care and Cleaning” in this manual.

work

• Switch operating light is broken.

• Call for Service.

 

 

 

10

Page 11
Image 11
Danby DR3099WGLP, DR3099BLGLP installation instructions Troubleshooting, Problem Possible Cause Solution

DR3099WGLP, DR3099BLGLP specifications

The Danby DR3099BLGLP and DR3099WGLP are premium portable air conditioning units designed to provide optimal cooling for spaces up to 550 square feet. These units combine modern technologies and features to ensure maximum comfort, energy efficiency, and versatility.

One of the standout features is the dual cooling technology, which enables both efficient cooling and dehumidifying functions. With a cooling capacity of up to 14,000 BTUs, these air conditioners can effectively maintain a comfortable environment even in the most sweltering heat. The dehumidifying function is essential for reducing indoor humidity levels, making it particularly beneficial in humid climates.

The DR3099 series units are also equipped with an energy-efficient design, boasting an Energy Efficiency Ratio (EER) that minimizes energy consumption while maximizing cooling performance. This translates to noticeable savings on electricity bills, making them an economical choice for consumers.

Users will appreciate the highly intuitive LED display panel, which allows for easy monitoring and adjustments to the desired temperature settings. The remote control enhances convenience, allowing users to change settings from a distance without interrupting their leisure activities.

For enhanced comfort, the units feature four different modes: cool, fan, dry, and auto, catering to various cooling needs throughout the year. The fan-only mode is particularly useful for gentle air circulation while the dry mode aids in moisture removal, maintaining a pleasant indoor atmosphere.

Portability is another key characteristic of the Danby DR3099 models. Each unit is equipped with caster wheels and a built-in handle, allowing for easy movement from room to room. Additionally, the quick installation kit included with the units ensures a hassle-free setup, enabling users to start enjoying cool air almost immediately.

The sleek design of both models, available in black (DR3099BLGLP) and white (DR3099WGLP), seamlessly integrates into any room aesthetic. Noise levels are maintained at a minimum, ensuring a quiet operation that doesn’t disturb daily activities or sleep.

With their impressive cooling capabilities, energy efficiency, versatile modes, and user-friendly features, the Danby DR3099BLGLP and DR3099WGLP are excellent choices for those looking to enhance their indoor comfort during hot months.